 |
 |
 |
 |
|
 |
 |
http://www.ultralightnews.ca/ Page 31 of 39
The Ultralight Store - your one stop ultralight store.
10.2Checking the condition of the cylinder head
Check the seal of cylinder heads and cylinders for places on which exhaust gas has blown through. These
places can be recognized by black lines over the seal and burned residue on the cooling fins. If this is the
case, the cylinder head must be immediately replaced. Check the indentation on the cylinder head for the
black residue. If present, remove it and eventually change the type of oil used.
|
|
