Kitfox, operating center of gravity documentation, Kitfox service advisory 30.
|
|
|
|
|
|
|
 |
|
|
|
SERVICE
LETTER #30
DATE:
May 1, 1994
SUBJECT:
Aft CG Limit
APPLICABILITY:
All Model IV-1200 Kitfox's
FROM:
SkyStar Engineering
This
service letter is intended to provide you with information concerning the
operating center of gravity range for your aircraft.
We
have completed a series of flight tests on our factory Model IV-1200
Kitfox, and our findings support the expanding of the allowable CG range.
The
new aft CG limit for Model IV-1200 Kitfox's and Model IV-1200 Speedsters
is 16" aft of the leading edge of the wing.
The old limit was established at 14.78", but that has been
found to be too conservative. At
16", you will find that loading your Kitfox within the CG range to be
much easier.
Please
make the appropriate changes in your builders manual and/or flight manual
referring to this service letter.
|
|
|
|
For hours and
hours of web video interviews on the world of ultralight
aviation subscribe to the Ultralight Flyer web video magazine -
$24.50 U.S. per year gives your access to web video on
ultralight aircraft, ultralight builders, ultralight
manufacturers, designer, accessories and much, much more!
|
|
|
|
|
|
Ultralight
Aircraft News Magazine
PO Box 1710 Holland
Landing
Ontario Canada
L9N 1P2 647-723-8767
ulnews@ultralightnews.com
|
|
Ultralight Aircraft News Web Magazine PO Box 1710 Holland Landing
Ontario Canada L9N 1P2 647-723-8767.
You may link to these pages or print
them out for your own personal use, but no part of this
publication may be copied or distributed, transmitted, transcribed,
stored in a retrieval system, or translated into any human or computer
language, in any form or by any means, electronic, mechanical,
manual, or otherwise, without the written permission of Dave
Loveman.
By copying or paraphrasing the intellectual
property on this site, you're automatically signing a binding contract
and agreeing to be billed $10,000 payable immediately. Copyright Ultralight News - Ultralight Flyer. ulnews@ultralightnews.com.
|