Kitfox series 5 Vixen elevator push pull tube inspection, Kitfox service advisory 32. |
||||||||||||
|
||||||||||||
|
||||||||||||
|
|
||||||||||||
|
SERVICE
LETTER #32 DATE:
June 23, 1994 SUBJECT:
Elevator Push-Pull Tubes APPLICABILITY:
All Series 5 Vixen Kitfox's COMPLIANCE:
As required FROM:
SkyStar Aircraft Product Development Department Some
Series 5 Vixen kits shipped before this date have included an elevator
push-pull tube that was cut incorrectly.
We have developed a retrofit kit P/N 10228.000 that corrects the
situation. Check the
dimension given in your Builder's Manual, and if your elevator push-pull
tube is shorter than that specified, a retrofit kit will be
sent to you free of charge. Instructions
and all necessary parts are included with the kit.
If you have any questions about this service letter or the kit
itself, please call Customer Service at 208-466-1711. |
||||||||||||
|
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
Ultralight
Aircraft News Magazine |
|
|||||||||||
|
Ultralight Aircraft News Web Magazine PO Box 1710 Holland Landing
Ontario Canada L9N 1P2 647-723-8767.
You may link to these pages or print
them out for your own personal use, but no part of this
publication may be copied or distributed, transmitted, transcribed,
stored in a retrieval system, or translated into any human or computer
language, in any form or by any means, electronic, mechanical,
manual, or otherwise, without the written permission of Dave
Loveman.
By copying or paraphrasing the intellectual
property on this site, you're automatically signing a binding contract
and agreeing to be billed $10,000 payable immediately. Copyright Ultralight News - Ultralight Flyer. ulnews@ultralightnews.com. |
||||||||||||
