Kitfox belly stringer attach angle, Kitfox service advisory 39 |
||||||||||||
|
||||||||||||
|
||||||||||||
|
|
||||||||||||
|
SERVICE
LETTER #39 DATE:
September 14, 1994 SUBJECT:
Belly Stringer Forward Attach Angle APPLICABILITY:
All Series 5 Vixens (including all Vixen 1200's) through S/N
V9410XXXX COMPLIANCE:
As required FROM:
SkyStar Aircraft Engineering Department Some
Series 5 Vixen fuselage weldments may have been shipped without the
forward belly stringer attach angle installed.
Inspect your fuselage for the presence of the attach angle, and
if you do not have it, you can still easily attach your belly stringer
without modifying the fuselage. The
drawing on the next page shows the angle that is the subject of this
letter, and the different steps for installing the stringer. If you
have any questions about this Service Letter, don't hesitate to call our
Customer Service Department at 208-466-1711. |
||||||||||||
|
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
Ultralight
Aircraft News Magazine |
|
|||||||||||
|
Ultralight Aircraft News Web Magazine PO Box 1710 Holland Landing
Ontario Canada L9N 1P2 647-723-8767.
You may link to these pages or print
them out for your own personal use, but no part of this
publication may be copied or distributed, transmitted, transcribed,
stored in a retrieval system, or translated into any human or computer
language, in any form or by any means, electronic, mechanical,
manual, or otherwise, without the written permission of Dave
Loveman.
By copying or paraphrasing the intellectual
property on this site, you're automatically signing a binding contract
and agreeing to be billed $10,000 payable immediately. Copyright Ultralight News - Ultralight Flyer. ulnews@ultralightnews.com. |
||||||||||||
