Kitfox service letter #43 |
||||||||||||
|
||||||||||||
|
||||||||||||
|
|
||||||||||||
|
SERVICE
LETTER #43 DATE:
November 28, 1994 SUBJECT:
Series 5 Speedster Rudder APPLICABILITY:
All Series 5 Speedsters COMPLIANCE:
As required FROM:
SkyStar Aircraft Engineering Department Due
to a conflict in the control system between the rudder intercostals and
the elevator, the rudder travel on all Series 5 Speedsters must be limited
to 25° in each direction and not 30°, as given in the assembly
instructions. If
you have already set the travel to 30°, please contact our Customer
Service Department at 208-466-1711 to retrofit your aircraft in accordance
with the current limitations. |
||||||||||||
|
|
||||||||||||
|
||||||||||||
|
||||||||||||
|
||||||||||||
Ultralight
Aircraft News Magazine |
|
|||||||||||
|
Ultralight Aircraft News Web Magazine PO Box 1710 Holland Landing
Ontario Canada L9N 1P2 647-723-8767.
You may link to these pages or print
them out for your own personal use, but no part of this
publication may be copied or distributed, transmitted, transcribed,
stored in a retrieval system, or translated into any human or computer
language, in any form or by any means, electronic, mechanical,
manual, or otherwise, without the written permission of Dave
Loveman.
By copying or paraphrasing the intellectual
property on this site, you're automatically signing a binding contract
and agreeing to be billed $10,000 payable immediately. Copyright Ultralight News - Ultralight Flyer. ulnews@ultralightnews.com. |
||||||||||||
